Features -
Hydraulic
material clamping from the sides eliminates waste, and ensures exact
positioning prior to punching. This system allows punching, even on
the edge of the part, without bending it. Feeding system uses a clamp
from the end of the material for complete processing with a minimum
of waste. Two linear guides support the feeding unit. AC servo motors
guaranteeing a repeatability of +/- 0.002 drive the slides. Quick tool
changes utilizing the Boschert tool cassette. The cassette slides out
of the machine housing for easy and quick access. Amada style tooling
for low cost and readily available punches and dies. Complete safety
enclosure using protective grating and light barriers ensure absolute
safety. CNC control designed specifically for copper bar processing
using proven Boschert hardware and software platforms. Set-up, training
and full warranty from our U.S. headquarters included.
|
| Technical Specifications |
| Punching pressure: |
36 tons (Opt. 50 tons) |
| Punching Heads: |
3 plus 1 cut-to-length shear station (Optional 5 Punching Heads) |
| Max. copper bar length: |
200 |
| Max. material thickness: |
½ inch |
| Max. punch diameter: |
4 x 31,7 mm bzw. any shape within 31,7 mm(B-Station) 1 x Cutting station 60 x 8 mm |
| Number of strokes: |
150 / 200 / minute |
| Min. copper bar width: |
¾ inch |
| Max. copper bar width: |
7 ½ inches (Optional: 13 ¾ inches) |
| Tooling system: |
Amada D station tooling in quick change cassette |
| Max. punch diameter: |
3.5 inches or any shape fitting within |
| Positioning accuracy: |
+/- 0.004 inch |
| Repeatability: |
+/- 0.002 inch |
| Max. positioning speeds: |
X-axis: 230 feet per minute |
| Max. positioning speeds: |
Y-axis: 98 feet per minute |
| Hydraulic system capacity: |
50 gallons |
| Length: |
10 ft. |
| Depth: |
19.5 ft. |
| Height: |
6 ft. |
| Motor performance: |
15 HP |
| Weight: |
26,500 lbs. |
|
