Notching Station -

• 1/4 mild steel*, 5/32 stainless steel** capacity
• 8-7/8 x 8-7/8 90 degree notch
• Super size table, 43 wide by 31 deep
• Milled bed surface for no float or stick operation
• Moveable electrical foot pedal
• Front to back cutting to hold material against stop
• Adjustable stroke, 35 to 50 per minute
• Two material hold downs
• Two heavy duty stops with 12 sliding bars
• Scale and T-shot left to right at front of bed
• Scale and T-shot parallel to the blades
• Scale on left and right side of table top
• Wired 220v/60c/3ph
• Internal stop for shearing
• Scrap bucket

Punching Station -

• Trumpf style tooling
• 5/32 mild steel*, 1/8 stainless steel**
• Maximum punch size: 1-1/8
• Size of punching table: 43 wide by 13 deep
• Maveable foot pedal
• Scrap bucket

* mild steel designated as 50,000 psi
** Stainless designated as 75,000 psi

BOSCHERT Patented Quality -

The patented Boschert TRI-GIDE™ system gives all Boschert notching machines the greatest accuracy and durability of any notcher made today.

TRI is for the three large guiding cylinders. Two cylinders are in the top of the machine, close to the blades, the third is in the base and fully integrated with the hydraulic piston.

GIDE is for the precise vertical travel of the ram. Torque from cutting heavy material is distributed evenly to all three cylinders.

TRI-GIDE™ Eliminates -

• Blade clearance adjustment for different material thicknesses
• Frequent blade sharpening due to sloppy guiding
• Uneven wear, and replacement problems with
  traditional guiding systems
  

Exclusive TRI-GIDE™ Benefits -

• Long blade life due to precise, rigid ram guiding
• Burr-free cuts on all gauges (within capacity)
• Off-center loading – 1 x 6 notch is no problem

TRI-GIDE™ is just part of the overall quality and ingenuity that goes into every Boschert Notcher. Other features include:

• Front-to-Back cutting - holds material against stops
• Milled table surface – keeps material from sticking
• Hi-Carbon Hi-chrome Blades – overlap on the cutting tip to eliminate blade chipping
• Thousands of machines installed in North America
• Parts for all machines ever built are available

Close-up of material stop bars on Silver Eagle