· Simple easy-to-use graphic control
· Perfect for cells or Prototyp Work
· High quality with low cost
· Extremely rigid frame
· 36 Tons, 32 bed length
· Accuracy of +/- 0.0008
· Precision tooling included
· Available with Programmable backgauge or 2-axis CNC
· Small floor space requirement
· Compact structure, easily installed
· Single hydraulic cylinder w/ twin ram guides on each side of machine
· Accuracy of much more expensive machines

The PROFI 28 CNC press brake is the ideal machine for forming small parts where tolerances as well as floorspace and budgets are tight.

The machine is designed so that anyone in the shop can quickly and accurately produce tight-tolerance parts.

Specifications

Maximum bending force - 36 Tons
Maximum bending lenght - 32.875
Distance between housings - 35
Maximum open height - 12.875
Maximum stroke - 7.875
Throat depth - 7.875
Pressing speed - 20 ipm
Return speed - 95 ipm
Stroke of Backgauge - 15
Height of die above floor - 33.5
Repeatability of ram - +/- 0.0008
Drive motor (230/460/3/60) - 4 HP
Weight - 6.650 lbs
Approx. floor space - 66 x 84 x 80

The boschert graphic control is simple enough that non-experienced operators can quickly program and manufacture accurate parts. In the manual mode a part can be programmed by entering only 4 lines of information as promoted by the control. The control feautures a tech-in mode so material specifications can be stored, thus eliminating test bends.